-
Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
-
Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or use waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinners or solvents.
-
In order to protect the environment, used oil and used oil filters must be disposed of at designated disposal sites.
- Click here
DRAIN ENGINE OIL
-
Remove the oil filler cap.
-
Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.
Note:Collect the oil in a disposable oil container.
-
Clean the oil pan drain plug and install it with a new gasket.
38 N*m 382 kgf*cm 28 ft.*lbf
-
- Click here
REMOVE OIL FILTER ELEMENT
-
Connect a hose with an inside diameter of 15 mm (0.591 in.) to the oil filter drain pipe.
Table 1. Text in Illustration *a Oil Filter Drain Pipe *b Hose -
Remove the oil filter drain plug.
-
Remove the O-ring from the oil filter drain plug and install it to an oil filter drain pipe.
-
Install the oil filter drain pipe to the oil filter cap and drain the engine oil.
Table 2. Text in Illustration *1 Oil Filter Cap *2 O-Ring *a Oil Filter Drain Pipe -
Remove the oil filter drain pipe.
-
Apply a light coat of engine oil to a new O-ring and install it to the oil filter drain plug.
-
Install the oil filter drain plug to the oil filter cap.
13 N*m 127 kgf*cm 9 ft.*lbf -
Using SST, remove the oil filter cap.
09228-06501 -
Remove the oil filter element and O-ring from the oil filter cap.
Table 3. Text in Illustration *1 Oil Filter Element *2 Oil Filter Cap *3 O-Ring
-