РАДИАТОР РАЗБОРКА


  1. REMOVE RADIATOR DRAIN COCK PLUG


    1. Remove the radiator drain cock plug.

    2. Remove the O-ring.

  2. REMOVE UPPER RADIATOR TANK PIPE


    1. A01BDP0

      Remove the 3 bolts and the upper radiator tank pipe.

    2. Remove the O-ring.

  3. REMOVE LOWER NO. 1 RADIATOR TANK PIPE


    1. A01BCC4

      Remove the 3 bolts and the lower No. 1 radiator tank pipe.

    2. Remove the O-ring.

  4. REMOVE LOWER NO. 2 RADIATOR TANK PIPE


    1. A01BB5R

      Remove the bolt to disconnect the lower No. 2 radiator tank pipe from the radiator assembly.

    2. Slide the hose clamp and remove the lower No. 2 radiator tank pipe.

  5. ASSEMBLE SST


    1. A01BC17E12
      Text in Illustration
      *a Part A
      *b Stopper Bolt
      *c Dimension B

      Install the claw to part A of the overhaul handle as shown in the illustration.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

    2. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

      Dimension B
      0.2 to 0.3 mm (0.00787 to 0.0118 in.)

      Note

      If this adjustment is not performed, the claw will be damaged.

  6. UNCAULK LOCK PLATE


    1. A01BBDZE02
      Text in Illustration
      *1 Tank
      *a Lock Plate

      Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

  7. REMOVE UPPER RADIATOR TANK


    1. A01BCLW

      Lightly tap the bracket of the radiator (or radiator hose inlet) with a plastic-faced hammer and remove the upper radiator tank.

    2. Remove the O-ring.

  8. REMOVE LOWER RADIATOR TANK

    Tech Tips

    Use the same procedure described for the upper radiator tank.