РАДИАТОР РАЗБОРКА


  1. REMOVE RADIATOR DRAIN COCK PLUG


    1. Remove the drain cock plug.

    2. Remove the O-ring.

  2. REMOVE RADIATOR UPPER TANK PIPE


    1. A01BHDH

      Remove the 6 bolts and the 2 radiator upper tank pipes.

    2. Remove the 2 O-rings.

  3. REMOVE RADIATOR LOWER TANK PIPE


    1. A01BCJ7

      Remove the 3 bolts and the No. 1 radiator lower tank pipe.

    2. Remove the 3 bolts and the No. 2 radiator lower tank pipe.

    3. Remove the 2 O-rings to the 2 radiator lower tank pipes.

  4. REMOVE NO. 2 RADIATOR LOWER TANK PIPE


    1. A01BB5R

      Remove the bolt.

    2. Separate the hose clamp and remove the No. 2 radiator lower tank pipe.

  5. ASSEMBLE SST


    1. A01BC17E07

      Install the claw to part A of the overhaul handle as shown in the illustration.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

    2. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

      Dimension B
      0.2 to 0.3 mm (0.008 to 0.012 in.)

  6. UNCAULK LOCK PLATE


    1. A01BBDZE01

      Using SST, squeeze the handle until stopped by the stopper bolt to release the caulking.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

  7. REMOVE RADIATOR TANK UPPER AND RADIATOR TANK LOWER


    1. A01BCLW

      Lightly tap the bracket of the radiator (or the connection area for the radiator hose inlet or outlet) with a plastic-faced hammer and remove the tanks.

    2. Remove the O-ring.