ТОПЛИВНЫЙ ФИЛЬТР СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. LOOSEN FUEL TANK CAP ASSEMBLY

  3. REMOVE FUEL FILTER ELEMENT SUB-ASSEMBLY


    1. A01BE4DJ02

      Disconnect the vacuum switch connector and warning switch connector.

    2. Disconnect the 2 fuel hoses.

    3. Disconnect the 2 fuel heater hoses. (w/ fuel heater)

    4. Loosen the drain cock to drain fuel.

    5. Tighten the drain cock.

    6. A01BAEJ

      Using a screwdriver, loosen the fastener nut until the can be loosened by hand.

    7. A01BCV1

      Fully loosen the fastener nut by hand.

      Tech Tips

      Loosen the fastener until the fuel filter cap assembly is removed.

    8. A01BETW

      Remove the fuel filter cap assembly, pull up one side of the fuel filter cap assembly and then lift off, as shown in the illustration.

    9. Remove the fuel filter element sub-assembly from the fuel filter case sub-assembly.

    10. Remove the O-rings from the fuel filter case sub-assembly.