ПРИВОДНОЙ РЕМЕНЬ СНЯТИЕ


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE RH

  3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.

  4. REMOVE FAN AND GENERATOR V BELT


    1. A01BHZDE01

      Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.

      Note

      When removing the fan and generator V belt, do not use the bolt of the idle pulley.

      Tech Tips

      After removing the fan and generator V belt, move the tensioner upward to the maximum amount.

  5. REMOVE TENSIONER PULLEY

    Note

    Perform the following procedure when it is necessary to replace the tensioner pulley.


    1. A01BFYY

      Remove the bolt, dust seal, tensioner pulley.