ИНТЕГРИРОВАННОЕ РЕЛЕ СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 1 INTEGRATION RELAY


    1. Remove the junction block cover.

    2. A01BHU1

      Using a screwdriver, detach the 2 claws and disconnect the No. 1 integration relay from the No. 1 junction block.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disconnect the 3 connectors.