ECM УСТАНОВКА


  1. INSTALL NO. 1 ECM BRACKET


    1. Install the 2 No. 1 ECM brackets with the 4 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL ECM

    Note

    Do not reuse an ECM that was dropped or that received a strong impact.


    1. Install the ECM to the wire harness support with the 4 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 4 ECM connectors.

    3. Insert the ECM together with the wire harness support and attach the 2 clips.

    4. Return the floor carpet.

  3. INSTALL FRONT SEAT ASSEMBLY RH

    Click here

  4. INSTALL FRONT DOOR SCUFF PLATE RH

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.