ECM УСТАНОВКА


  1. INSTALL ECM


    1. A01BALTE01

      Install the ECM cover with the 4 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 4 ECM connectors.

    3. A01BDAGE01

      Temporary install the ECM cover w/ ECM to the clamp.

    4. Install the ECM cover w/ ECM with the 2 clips.

      Note

      Do not use the ECM that has been dropped or given strong impact.

    5. Install the floor carpet.

  2. INSTALL FRONT SEAT ASSEMBLY (for Hi-back Seat Type)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  3. INSTALL FRONT SEAT ASSEMBLY (for Low-back Seat Type)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  4. INSTALL FRONT DOOR SCUFF PLATE RH

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. INSTALL BATTERY SERVICE HOLE COVER

  7. PERFORM INITIALIZATION

    Click here