ECM СНЯТИЕ


  1. REMOVE BATTERY SERVICE HOLE COVER

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT DOOR SCUFF PLATE RH

  4. REMOVE FRONT SEAT ASSEMBLY RH


  5. REMOVE ECM


    1. Fold back the floor carpet.

    2. A01BD4D

      Remove the 3 bolts and disconnect the ECM.

    3. A01BDIXE01
      Text in Illustration
      *a Push
      *b Lock

      Detach the 2 wire harness clamps from the No. 1 ECM bracket and No. 2 ECM bracket.

    4. Disconnect the 2 ECM connectors and remove the ECM.

      Note

      After disconnecting a ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.


      1. Raise the 2 levers while pushing the locks on the 2 levers and disconnect the 2 ECM connectors.

      2. Remove the ECM.

  6. REMOVE NO. 1 ECM BRACKET


    1. A01BBKU

      Remove the 3 screws and No. 1 ECM bracket.

  7. REMOVE NO. 2 ECM BRACKET


    1. A01BCQC

      Remove the 2 screws and No. 2 ECM bracket.