ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ УСТАНОВКА


  1. INSTALL DIESEL TURBO INLET AIR TEMPERATURE SENSOR


    1. A01BDJJE01

      Install a new gasket and the diesel turbo inlet air temperature sensor.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Connect the diesel turbo inlet air temperature sensor connector.

  2. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transaxle)


    1. A01BBQWE01

      Coat a new O-ring with ATF and install the oil filler tube.

    2. Install the oil filler tube with the 2 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 8 ft.*lbf }

  3. INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY (for Automatic Transaxle)

  4. INSTALL ENGINE SERVICE HOLE COVER NO.2


    1. Install the engine service hole cover No.2 with the 3 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }
    2. A01BFN9

      Return the carpet.

  5. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. A01BE2N

      Install the intake air temperature sensor.

    2. Connect the intake air temperature sensor connector.

  6. INSTALL AIR CLEANER INLET SUB-ASSEMBLY


    1. A01BAAL

      Temporarily install the air cleaner inlet sub-assembly with the 2 bolts.

    2. Install the clip, and tighten the 2 bolts.

      Torque:
      18 N*m  { 180 kgf*cm, 13 ft.*lbf }

  7. INSTALL FRONT BUMPER

  8. INSTALL STEP PLATE COVER RH

  9. INSTALL STEP PLATE COVER LH

  10. INSTALL RADIATOR GRILLE