Click here

ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE RADIATOR GRILLE


    1. A01BER1E01

      Выверните 2 винта и освободите 2 фиксатора.

    2. Освободите 6 захватов и 4 фиксатора, а затем снимите решетку радиатора.

  2. Click here

    REMOVE STEP PLATE COVER LH

  3. Click here

    REMOVE STEP PLATE COVER RH

  4. Click here

    REMOVE FRONT BUMPER


    1. A01BF95E01

      Освободите 8 фиксаторов и выверните 3 болта.

    2. Отцепите 12 захватов и снимите бампер.

    3. Отсоедините разъемы (для моделей с противотуманными фарами).

  5. Click here

    REMOVE AIR CLEANER INLET SUB-ASSEMBLY


    1. A01BAAL

      Remove the 2 bolts, clip, and the air cleaner inlet sub-assembly.

  6. Click here

    REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. A01BE2N

      Disconnect the intake air temperature sensor connector.

    2. Remove the intake air temperature sensor.

  7. Click here

    REMOVE ENGINE SERVICE HOLE COVER NO.2


    1. A01BG4E

      Roll up the carpet.

    2. Remove the 3 bolts and the engine service hole cover No.2.

  8. Click here

    REMOVE TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY (for Automatic Transaxle)


    1. A01BH56

      Remove the transmission oil level gauge sub-assembly from the transmission oil filler tube.

  9. Click here

    REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transaxle)


    1. A01BBQWE01

      Remove the 2 bolts transmission oil filler tube sub-assembly.

    2. Remove the O-ring from the oil filler tube sub-assembly.

  10. Click here

    REMOVE DIESEL TURBO INLET AIR TEMPERATURE SENSOR


    1. A01BDJJE01

      Disconnect the diesel turbo inlet air temperature sensor connector.

    2. Remove the diesel turbo inlet air temperature sensor and gasket.