Click here

ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1)

  2. Click here

    SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY


    1. A01BBMI

      Отверните 2 болта. Отсоедините масляный бачок лопастного насоса в сборе.

  3. Click here

    REMOVE CRANKSHAFT POSITION SENSOR


    1. A01BB55

      Disconnect the crankshaft position sensor connector.

    2. Separate the connector from the vacuum pipe No.1.

    3. A01BD2A

      Separate the 3 wire harness clamps.

    4. Remove the bolt and the crankshaft position sensor.