REAR SHOCK ABSORBER DISPOSAL


  1. DISPOSE OF REAR SHOCK ABSORBER (for 2WD)


    1. A017EWHE01

      Fully extend the shock absorber piston rod.

    2. Using a drill, make a hole in area B shown in the illustration to discharge the gas inside.

      Length (A)
      25 mm (0.98 in.)
      Length (B)
      25 mm (0.98 in.)

      CAUTION:


      • Be careful when drilling because shards of metal may fly about. Always use proper safety equipment.

      • The gas is colorless, odorless and non-poisonous.

  2. DISPOSE OF REAR SHOCK ABSORBER (for 4WD)


    1. A017FK9E02

      Fully extend the shock absorber piston rod.

    2. Using a drill, make a hole in area B shown in the illustration to discharge the gas inside.

      Length (A)
      25 mm (0.98 in.)
      Length (B)
      25 mm (0.98 in.)

      CAUTION:


      • Be careful when drilling because shards of metal may fly about. Always use proper safety equipment.

      • The gas is colorless, odorless and non-poisonous.