Click here

FRONT STABILIZER BAR INSTALLATION

Click here
Click here
  1. Click here

    INSTALL NO. 1 FRONT STABILIZER BAR BUSHING


    1. A017B1NE02

      Install the 2 No. 1 front stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

      Note:

      Install the No. 1 front stabilizer bar bushings so that the cutout faces the rear of the vehicle.

  2. Click here

    INSTALL NO. 2 FRONT STABILIZER BRACKET LH


    1. A017CFM

      Install the No. 2 front stabilizer bracket LH to the No. 1 front stabilizer bar bushing.

  3. Click here

    INSTALL NO. 2 FRONT STABILIZER BRACKET RH

    Tip:

    Perform the same procedure as the LH side.

  4. Click here

    INSTALL FRONT STABILIZER BAR


    1. Install the front stabilizer bar by inserting it from the right side of the vehicle.

  5. Click here

    INSTALL NO. 1 FRONT STABILIZER BRACKET LH


    1. A017DRG

      Install the No. 1 front stabilizer bracket LH to the front frame assembly with the 2 bolts.

      29 N*m 296 kgf*cm 21 ft.*lbf
  6. Click here

    INSTALL NO. 1 FRONT STABILIZER BRACKET RH

    Tip:

    Perform the same procedure as the LH side.

  7. Click here

    INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. A017CKL

      Install the front stabilizer link assembly LH with the nut.

      74 N*m 755 kgf*cm 55 ft.*lbf
      Tip:

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  8. Click here

    INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tip:

    Perform the same procedure as the LH side.

  9. Click here

    INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

    Tip:

    Install engine assembly with transaxle (Click here).