Click here

FRONT LOWER SUSPENSION ARM REMOVAL

Click here
Click here
  1. Click here

    REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    Tip:

    Remove engine assembly with transaxle (Click here).

  2. Click here

    REMOVE NO. 1 FRONT STABILIZER BRACKET LH


    1. A017DRG

      Remove the 2 bolts and the No. 1 front stabilizer bracket LH from the front frame assembly.

  3. Click here

    REMOVE NO. 1 FRONT STABILIZER BRACKET RH

    Tip:

    Perform the same procedure as the LH side.

  4. Click here

    REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY

  5. Click here

    REMOVE POWER STEERING LINK ASSEMBLY


    1. A017BH9

      Remove the 2 bolts, 2 nuts, and power steering link assembly.

      Note:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut fixed.

  6. Click here

    INSTALL ENGINE HANGERS


    1. A017DNOE01

      Install the 2 engine hangers with the 4 bolts as shown in the illustration.

      Part No.
      No. 1 engine hanger 12281-31120
      No. 2 engine hanger 12282-31100
      Bolts 91671-10825
      33 N*m 337 kgf*cm 24 ft.*lbf

    2. Attach the engine sling device and hang the engine with the chain block.

  7. Click here

    SEPARATE FRONT FRAME ASSEMBLY


    1. A017EM0

      Disconnect the active mount VSV connector and harness clamp.

    2. A017FEYE01

      Loosen the 3 nuts.

    3. A017DSBE01

      Remove the 5 hole plugs.

    4. A017ERYE01

      Remove the 9 nuts.

    5. A017EAV

      Remove the 2 bolts and separate the engine with transaxle from the front frame assembly.

  8. Click here

    REMOVE FRONT LOWER SUSPENSION ARM


    1. A017CXW

      Remove the 3 bolts, nut, and the front lower suspension arm from the front frame assembly.

    2. Remove the front lower arm bushing stopper from the front lower suspension arm.