Click here

FRONT AXLE HUB ON-VEHICLE INSPECTION

Click here
Click here
  1. Click here

    REMOVE FRONT WHEEL

  2. Click here

    SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY


    1. A017DGF

      Remove the 2 bolts and separate the front disc brake caliper assembly.

      Note:

      Use wire or an equivalent tool to keep the front disc brake caliper assembly from hanging down by the flexible hose.

  3. Click here

    REMOVE FRONT DISC


    1. A017EY2E01

      Remove the front disc.

      Tip:

      Put matchmarks on the disc and the axle hub.

  4. Click here

    INSPECT FRONT AXLE HUB BEARING LOOSENESS


    1. A017B18

      Using a dial indicator, check for looseness near the center of the front axle hub.

      Maximum looseness
      0 mm (0 in.)
      Note:

      Ensure that the dial indicator is set perpendicular to the measurement surface.

      Tip:

      If the looseness exceeds the maximum, replace the front axle hub bearing.

  5. Click here

    INSPECT FRONT AXLE HUB RUNOUT


    1. A017E7K

      Using a dial indicator, check for runout on the surface of the axle hub outside the hub bolt.

      Maximum runout
      0.05 mm (0.0020 in.)
      Note:

      Ensure that the dial indicator is set perpendicular to the measurement surface.

      Tip:

      If the runout exceeds the maximum, replace the front axle hub.

  6. Click here

    INSTALL FRONT DISC


    1. A017EY2E01

      Align the matchmarks and install the front disc.

      Note:

      When replacing the disc with a new one, select the installation position where the front disc has minimal runout.

  7. Click here

    INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY


    1. A017DGF

      Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.

      104 N*m 1060 kgf*cm 76 ft.*lbf
      Note:

      Do not twist the brake hose when installing the front disc brake caliper assembly.

  8. Click here

    INSTALL FRONT WHEEL

    103 N*m 1050 kgf*cm 76 ft.*lbf