FRONT AXLE HUB BOLT REPLACEMENT


  1. REMOVE FRONT WHEEL

  2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY


    1. A017DGF

      Remove the 2 bolts and separate the front disc brake caliper assembly.

      Note

      Use wire or an equivalent tool to keep the front disc brake caliper assembly from hanging down by the flexible hose.

  3. REMOVE FRONT DISC


    1. A017EY2E01

      Remove the front disc.

      Tech Tips

      Put matchmarks on the disc and the axle hub.

  4. REMOVE FRONT AXLE HUB BOLT

    A017DI3E02

    1. Temporarily install 2 nuts and 2 washers to the front axle hub bolt as shown in the illustration.

    2. Align the front axle hub bolt with steering knuckle cutout A as shown in the illustration.

    3. Using SST and a brass bar or an equivalent tool to hold the front axle, remove the front axle hub bolt.

      SST
      09628-10011

  5. INSTALL FRONT AXLE HUB BOLT

    A017CE7E02

    1. Install a washer and nut to a new front axle hub bolt as shown in the illustration.

    2. Using a brass bar or an equivalent tool to hold the front axle, install the hub bolt by tightening the nut.

  6. INSTALL FRONT DISC


    1. A017EY2E01

      Align the matchmarks and install the front disc.

      Note

      When replacing the disc with a new one, select the installation position where the front disc has minimal runout.

  7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY


    1. A017DGF

      Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.

      Torque:
      104 N*m  { 1060 kgf*cm, 76 ft.*lbf }

      Note

      Do not twist the brake hose when installing the front disc brake caliper assembly.

  8. INSTALL FRONT WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }