REAR DIFFERENTIAL CARRIER OIL SEAL REMOVAL


  1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    1. A017FGM

      Depress the brake pedal and hold it.

    2. Using a hexagon wrench (6 mm), loosen the cross groove joint set bolts 1/2 turn.

      Tech Tips

      Put a piece of cloth or equivalent into the inside of the universal joint cover so that the boot does not touch the inside of the universal joint cover.

    3. A017FC7E01

      Place matchmarks on the rear propeller shaft and rear drive pinion flange sub-assembly.

    4. Remove the 4 nuts, 4 bolts and 4 washers.

    5. A017G71

      Remove the 4 bolts and 4 adjusting shims.

    6. A017DKO

      Using a brass bar and a hammer, remove the propeller shaft with center bearing shaft assembly.

    7. A017G8QE01

      Insert SST into the transfer to prevent oil leakage.

      SST
      09325-20010

  2. REMOVE REAR DIFFERENTIAL FILLER PLUG


    1. A017CDX

      Using a hexagon wrench (10 mm), remove the rear differential filler plug and rear differential filler plug gasket.

  3. REMOVE REAR DIFFERENTIAL DRAIN PLUG


    1. A017B3M

      Using a hexagon wrench (10 mm), remove the rear differential drain plug and rear differential drain plug gasket, and drain the oil.

  4. REMOVE REAR DRIVE PINION NUT


    1. A017G58E01

      Using SST and a hammer, unstake the staked part of the rear drive pinion nut.

      SST
      09930-00010
    2. A017CDME01

      Using SST to hold the rear drive pinion companion flange sub-assembly, remove the rear drive pinion nut.

      SST
      09330-00021

  5. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY


    1. A017EUBE01

      Using SST, remove the rear drive pinion companion flange sub-assembly.

      SST
      09950-30012   ( 09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020 )

  6. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL


    1. A017D4YE01

      Using SST, remove the rear differential carrier oil seal.

      SST
      09308-10010

  7. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

  8. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING


    1. A017GC0E01

      Using SST, remove the rear drive pinion front tapered roller bearing.

      SST
      09556-22010

  9. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER