Click here

REAR DIFFERENTIAL CARRIER OIL SEAL REMOVAL

Click here
Click here
  1. Click here

    REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    1. A017FGM

      Depress the brake pedal and hold it.

    2. Using a hexagon wrench (6 mm), loosen the cross groove joint set bolts 1/2 turn.

      Tip:

      Put a piece of cloth or equivalent into the inside of the universal joint cover so that the boot does not touch the inside of the universal joint cover.

    3. A017FC7E01

      Place matchmarks on the rear propeller shaft and rear drive pinion flange sub-assembly.

    4. Remove the 4 nuts, 4 bolts and 4 washers.

    5. A017G71

      Remove the 4 bolts and 4 adjusting shims.

    6. A017DKO

      Using a brass bar and a hammer, remove the propeller shaft with center bearing shaft assembly.

    7. A017G8QE01

      Insert SST into the transfer to prevent oil leakage.

      09325-20010
  2. Click here

    REMOVE REAR DIFFERENTIAL FILLER PLUG


    1. A017CDX

      Using a hexagon wrench (10 mm), remove the rear differential filler plug and rear differential filler plug gasket.

  3. Click here

    REMOVE REAR DIFFERENTIAL DRAIN PLUG


    1. A017B3M

      Using a hexagon wrench (10 mm), remove the rear differential drain plug and rear differential drain plug gasket, and drain the oil.

  4. Click here

    REMOVE REAR DRIVE PINION NUT


    1. A017G58E01

      Using SST and a hammer, unstake the staked part of the rear drive pinion nut.

      09930-00010
    2. A017CDME01

      Using SST to hold the rear drive pinion companion flange sub-assembly, remove the rear drive pinion nut.

      09330-00021
  5. Click here

    REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY


    1. A017EUBE01

      Using SST, remove the rear drive pinion companion flange sub-assembly.

      09950-30012 09951-03010 09953-03010 09954-03010 09955-03030 09956-03020
  6. Click here

    REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL


    1. A017D4YE01

      Using SST, remove the rear differential carrier oil seal.

      09308-10010
  7. Click here

    REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

  8. Click here

    REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING


    1. A017GC0E01

      Using SST, remove the rear drive pinion front tapered roller bearing.

      09556-22010
  9. Click here

    REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER