Click here

TRANSMISSION CONTROL CABLE ASSEMBLY ADJUSTMENT

Click here
Click here
  1. Click here

    INSPECT SHIFT LEVER POSITION


    1. When shifting from the P to the R position with the ignition switch on (IG) and brake pedal depressed, make sure that the shift lever moves smoothly and can be moderately operated.

    2. Start the engine and make sure that the vehicle moves forward when shifting from the N to the D position and moves rearward when shifting to the R position.

  2. Click here

    ADJUST SHIFT LEVER POSITION


    1. A017FXU

      Loosen the nut on the control shaft lever.

    2. A017E5O

      Push the control shaft fully downward.

    3. Return the control shaft lever 2 notches to the N position.

    4. A017DJO

      While pushing the control cable end up with the shift lever in the N position, install it to the control shaft lever with the nut.

      12 N*m 122 kgf*cm 9 ft.*lbf
      Note:

      • If the control cable end is excessively pushed up, the shift lever cannot be adjusted.

      • When tightening the nut, confirm that the control cable is properly stretched.

    5. Start the engine and make sure that the vehicle moves forward when shifting the lever from the N to the D position and moves rearward when shifting it to the R position.