SHIFT LEVER ADJUSTMENT


  1. ADJUST SHIFT LEVER POSITION


    1. A017FXU

      Loosen the nut on the control shaft lever.

    2. A017E5O

      Push the control shaft fully downward.

    3. Return the control shaft lever 2 notches to the N position.

    4. A017DJO

      While pushing the control cable end up with the shift lever in the N position, install it to the control shaft lever with the nut.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

      Note


      • If the control cable end is excessively pushed up, the shift lever cannot be adjusted.

      • When tightening the nut, confirm that the control cable is properly stretched.

    5. Start the engine and make sure that the vehicle moves forward when shifting the lever from the N to the D position and moves rearward when shifting it to the R position.