SHIFT LEVER DISASSEMBLY


  1. REMOVE POSITION INDICATOR HOUSING ASSEMBLY


    1. A017G1G

      Separate the connector and 2 wire harness clamps from the shift lock control unit.

    2. A017C82E01

      Using a screwdriver, release the stopper.

    3. Using a screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear of the connector.

    4. A017C90

      Separate the wire harness clamp from the shift lock control unit.

    5. Disengage the 4 claws and remove the position indicator housing from the shift lock control unit.

  2. REMOVE POSITION INDICATOR HOUSING LOWER


    1. A017FA3

      Disengage the 4 claws and remove the position indicator housing lower from the position indicator housing.

  3. REMOVE POSITION INDICATOR LIGHT GUIDE


    1. A017FWE

      Disengage the 4 claws and remove the position indicator light guide from the position indicator housing lower.

  4. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    1. A017B5V

      Remove the indicator light wire sub-assembly from the position indictor light guide.

  5. REMOVE POSITION INDICATOR LIGHT BULB


    1. Remove the bulb and cap from the indicator light wire socket.

  6. REMOVE POSITION INDICATOR SLIDE COVER


    1. A017F00

      Remove the position indicator slide cover from the position indicator housing lower.

  7. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER


    1. A017EXF

      Remove the position indicator slide cover from the No. 2 position indicator slide cover.