CHARGING SYSTEM Charge Warning Light Comes ON while Driving

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK LOCK FUNCTION OF CLUTCH PULLEY


    1. Check the lock function with the pulley installed in the vehicle.


      1. Visually check that the rotor in the generator operates with the engine started.

    2. Check the lock function with the pulley removed from the vehicle.


      1. Remove the generator pulley cap. Using SST, hold the generator rotor.

      2. Turn the clutch pulley clockwise and check that the outer ring locks.

        A017B4VE01
        OK
        The outer ring locks.
      SST
      09820-63020

    NG

    REPLACE CLUTCH PULLEY

    OK

  2. CHECK LOCK OF CLUTCH PULLEY


    1. Start the engine and visually check for looseness of the clutch pulley.

      OK
      The clutch pulley is not loose.

    NG

    TIGHTEN CLUTCH PULLEY TO THE SPECIFIED TORQUE

    OK

    REPLACE GENERATOR ASSEMBLY