IGNITION SWITCH INSPECTION


  1. INSPECT IGNITION SWITCH ASSEMBLY


    1. A017DJGE01

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      Between each terminal LOCK 10 kΩ or higher
      4 (AM1) - 2 (ACC) ACC Below 1 Ω

      4 (AM1) - 2 (ACC)

      4 (AM1) - 1 (IG1)

      5 (AM2) - 6 (IG2)

      		 ON Below 1 Ω

      4 (AM1) - 1 (IG1)

      4 (AM1) - 3 (ST1)

      5 (AM2) - 6 (IG2)

      5 (AM2) - 7 (ST2)

      		 START Below 1 Ω

      If the result is not as specified, replace the switch assembly.