IGNITION RELAY ON-VEHICLE INSPECTION


  1. INSPECT IGNITION RELAY


    1. Inspect the No. 1 ignition relay.


      1. A017EO0E23

        Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Condition Specified Condition
        3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
        3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω

        If the resistance is not as specified, replace the No. 1 ignition relay.

    2. Inspect the No. 2 ignition relay.


      1. A017B6E

        Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Condition Specified Condition
        3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
        3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω

        If the resistance is not as specified, replace the No. 2 ignition relay.