Click here

STARTER INSTALLATION

Click here
Click here
  1. Click here

    INSTALL STARTER ASSEMBLY


    1. A017DG2

      Install the starter assembly with the 2 bolts.

      37 N*m 377 kgf*cm 27 ft.*lbf
    2. A017FCM

      Connect the starter connector.

    3. Connect the starter wire with the nut and cover the nut with the cap.

      9.8 N*m 100 kgf*cm 87 in.*lbf
  2. Click here

    INSTALL AIR CLEANER BRACKET


    1. A017EFA

      Install the bracket to the reinforcement with the 2 bolts.

      12 N*m 120 kgf*cm 9 ft.*lbf
  3. Click here

    INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A017BI0

      Install the air cleaner case with the 3 bolts.

      5.0 N*m 51 kgf*cm 44 in.*lbf

    2. Connect the hose and connector.

  4. Click here

    INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A017DHBE01

      Install the air cleaner filter element, align the groove on the air cleaner hose with the throttle body alignment tab and tighten the clamp as shown in the illustration.

      Tip:

      • A = 30°

      • B = 11 to 14 mm (0.433 in. to 0.551 in.)

    2. Install the air cleaner cap with the 2 bolts and clips.

      5.0 N*m 51 kgf*cm 44 in.*lbf
    3. A017BB9

      Connect the 3 vacuum hoses.

    4. A017EEU

      Connect the mass air flow meter connector.

    5. Connect the No. 2 ventilation hose and fuel vapor feed hose assembly.

  5. Click here

    INSTALL NO. 1 AIR CLEANER INLET


    1. A017C2QE01

      Install the No. 1 air cleaner inlet with the 2 bolts.

      7.0 N*m 71 kgf*cm 62 in.*lbf [A]
      5.0 N*m 51 kgf*cm 44 in.*lbf [B]

    2. Connect the 2 vacuum hoses.

  6. Click here

    INSTALL NO. 2 AIR CLEANER INLET


    1. A017D82

      Install the No. 2 air cleaner inlet with the 2 bolts.

      7.0 N*m 71 kgf*cm 62 in.*lbf

    2. Connect the 2 vacuum hoses and harness clamps.

  7. Click here

    INSTALL BATTERY

    Note:

    When reconnected the cable, some systems need to be initialized. (Click here).


    1. A017FMCE02

      Install the battery tray and battery.

    2. Install the battery clamp with the bolt and nut.

      Bolt
      5.4 N*m 55 kgf*cm 47 in.*lbf
      Nut A
      5.4 N*m 55 kgf*cm 47 in.*lbf

    3. Connect the positive battery terminal, and tighten the nut.

      Nut B
      6.4 N*m 64 kgf*cm 57 in.*lbf

    4. Connect the negative battery terminal, and tighten the nut.

      Nut C
      6.4 N*m 64 kgf*cm 57 in.*lbf
  8. Click here

    INSTALL COOL AIR INTAKE DUCT SEAL


    1. A017CN1

      Install the cool air intake duct seal with the 11 clips.