STARTER DISASSEMBLY


  1. REMOVE REPAIR SERVICE STARTER KIT


    1. A017EOYE08

      Remove the nut and disconnect the lead wire from terminal C.

    2. A017FHL

      Remove the 2 screws that hold the repair service starter kit to the motor terminal starter kit.

    3. Remove the repair service starter kit.

    4. Remove the return spring and plunger from the motor terminal starter kit.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A017BBG

      Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.

    2. A017D0N

      Remove the starter yoke assembly from the starter commutator end frame assembly.

  3. REMOVE STARTER ARMATURE PLATE


    1. A017DA1

      Remove the starter armature plate from the starter yoke assembly.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. A017B81

      Using a screwdriver, remove the starter commutator end frame cover.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. A017DKRE03

      Using snap ring pliers, remove the snap ring and plate washer.

    2. Remove the starter armature assembly from the starter commutator end frame assembly.

      Note

      Do not drop the starter armature assembly

  6. REMOVE PLANETARY GEAR


    1. A017D6V

      Remove the 3 planetary gears from the motor terminal starter kit.