Click here

STARTER REMOVAL

Click here
Click here
  1. Click here

    REMOVE COOL AIR INTAKE DUCT SEAL


    1. A017CN1

      Remove the 11 clips and cool air intake duct seal.

  2. Click here

    REMOVE BATTERY

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


    1. A017FMC

      Loosen the nut, and disconnect the negative battery terminal.

    2. Loosen the nut, and disconnect the positive battery terminal.

    3. Loosen the nut, and remove the bolt and battery clamp.

    4. Remove the battery and battery tray.

  3. Click here

    REMOVE NO. 2 AIR CLEANER INLET


    1. A017D82

      Disconnect the 2 vacuum switching valve clamps.

    2. Disconnect the 2 vacuum hoses.

    3. Remove the 2 bolts and No. 2 air cleaner inlet.

  4. Click here

    REMOVE NO. 1 AIR CLEANER INLET


    1. A017C2Q

      Disconnect the 2 vacuum hoses, and remove the 2 bolts and No. 1 air cleaner inlet.

  5. Click here

    REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A017BB9

      Disconnect the 3 vacuum hoses.

    2. A017EZ4

      Loosen the No. 1 air cleaner hose clamp.

    3. Disconnect the hose clamps and No. 2 ventilation hose.

    4. Disconnect the mass air flow meter connector.

    5. A017FXX

      Release the 2 clips, and remove the 2 bolts.

    6. Remove the air cleaner cap sub-assembly and air cleaner filter element.

  6. Click here

    REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    1. A017BI0

      Remove the 3 bolts, disconnect the hose and the connector, and remove the air cleaner case sub-assembly.

  7. Click here

    REMOVE AIR CLEANER BRACKET


    1. Remove the 2 bolts and bracket.

  8. Click here

    REMOVE STARTER ASSEMBLY


    1. A017FCM

      Disconnect the starter connector.

    2. Open the terminal cap, remove the nut and disconnect the starter wire.

    3. A017DG2

      Remove the 2 bolts and starter.