GENERATOR REPLACEMENT


  1. REPLACE GENERATOR DRIVE END FRAME BEARING


    1. A017C88

      Remove the 4 screws and retainer plate from the drive end frame.

    2. A017C9SE01

      Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.

      SST
      09950-60010   ( 09951-00250 )
      09950-70010   ( 09951-07100 )
    3. A017FATE01

      Using SST and a press, press in a new generator drive end frame bearing.

      SST
      09950-60010   ( 09951-00470 )
      09950-70010   ( 09951-07100 )
    4. A017EIWE01

      Fit the tabs on the retainer plate into the cutouts on the drive end frame to install the retainer plate.

    5. Install the 4 screws.

      Torque:
      2.3 N*m  { 23 kgf*cm, 20 in.*lbf }