Click here

OIL PRESSURE SWITCH INSTALLATION

Click here
Click here
  1. Click here

    INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A017B5AE04

      Apply adhesive to 2 or 3 threads of the oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
    2. A017G29

      Using a 24 mm deep socket wrench, install the oil pressure switch assembly.

      15 N*m 153 kgf*cm 11 ft.*lbf
      Note:

      Do not start the engine for at least 1 hour after installation.

    3. Connect the oil pressure switch assembly connector.

    4. A017EFNE01

      Connect the wiring harness protector.

  2. Click here

    INSPECT FOR OIL LEAK


    1. Start the engine.

    2. Check for engine oil leaks from the oil pressure switch assembly.

  3. Click here

    INSTALL FRONT FENDER APRON SEAL RH


    1. A017FOB

      Install the front fender apron seal RH with the 2 bolts and clip.

  4. Click here

    INSTALL FRONT WHEEL RH (for 4WD)

    103 N*m 1050 kgf*cm 76 ft.*lbf