OIL PRESSURE SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH (for 4WD)

  2. REMOVE ENGINE UNDER COVER ASSEMBLY (for 2WD)


    1. A017FPR

      Remove the 2 bolts and engine under cover assembly RR.

    2. A017FXN

      Remove the 2 bolts, 2 screws, 5 clips and engine under cover assembly.

  3. DISCONNECT FRONT FENDER LINER RH (for 4WD)

  4. REMOVE FRONT FENDER APRON SEAL RH (for 4WD)


    1. A017FOB

      Remove the 2 bolts, clip and front fender apron seal RH.

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A017EFNE01

      Disconnect the wiring harness protector. (w/ oil cooler)

    2. Disconnect the oil pressure switch assembly connector.

    3. A017BB8

      Using a 24 mm deep socket wrench, remove the oil pressure switch assembly. (w/o oil cooler)

    4. A017G29

      Using a 24 mm deep socket wrench, remove the oil pressure switch assembly. (w/ oil cooler)