RADIATOR ON-VEHICLE CLEANING


  1. INSPECT RADIATOR ASSEMBLY

    A017C9A

    1. Check that the radiator and condenser are not blocked with leaves, dirt, or insects. Clean the hose connections.


      • If the fins are blocked, wash them with water or a steam cleaner.

      Note


      • If the distance between the steam cleaner and core is too close, the fins may be damaged.

      • Keep the following injection distance.

        Standard injection distance
        Injection Pressure Specified Condition

        2,942 to 4,903 kPa

        (30 to 50 kgf/cm2, 427 to 711 psi)

        		 300 mm (11.81 in.)

        4,903 to 7,845 kPa

        (50 to 80 kgf/cm2, 711 to 1,138 psi)

        		 500 mm (19.69 in.)

      • If the fins are bent, straighten them with a screwdriver or pliers.

      • Never apply water directly onto the electronic components.

    2. Dry the fins with compressed air.