Click here

EXHAUST PIPE REMOVAL

Click here
Click here
  1. Click here

    REMOVE ENGINE UNDER COVER ASSEMBLY


    1. A017FPR

      Remove the 2 bolts and engine under cover assembly RR.

    2. A017FXN

      Remove the 2 bolts, 2 screws, 5 clips and engine under cover assembly.

  2. Click here

    REMOVE NO. 1 ENGINE UNDER COVER


    1. A017B8T

      Remove the 6 bolts, 2 clips and No. 1 engine under cover.

  3. Click here

    REMOVE NO. 2 ENGINE UNDER COVER


    1. A017CNJ

      Remove the 2 bolts and No. 2 engine under cover.

  4. Click here

    REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A017DZ8

      Remove the 2 bolts and 2 compression springs.

    2. Disconnect the exhaust pipe support and remove the tail exhaust pipe assembly.

    3. Remove the gasket from the center exhaust pipe assembly.

  5. Click here

    REMOVE EXHAUST PIPE DAMPER


    1. A017CTV

      Remove the 2 bolts and exhaust pipe damper.

  6. Click here

    REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. A017EM8

      Remove the 2 bolts and 2 compression springs.

    2. Disconnect the 3 exhaust pipe supports and remove the center exhaust pipe assembly.

    3. Remove the gasket from the No. 3 exhaust pipe sub-assembly.

  7. Click here

    REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY


    1. A017C8S

      Remove the 3 clamps and disconnect the heated oxygen sensor (for bank 1 sensor 2) connector.

    2. A017F2Y

      Remove the 2 bolts, 2 nuts and front No. 3 exhaust pipe sub-assembly.

    3. Remove the 2 gaskets from the front No. 3 exhaust pipe sub-assembly.

  8. Click here

    REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A017BZAE01

      Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe sub-assembly.

      09224-00010
  9. Click here

    REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A017CJP

      Disconnect the heated oxygen sensor (for bank 2 sensor 2) connector.

    2. A017EQE

      Loosen the bolt.

    3. Remove the 2 nuts and front exhaust pipe assembly.

    4. Remove the gasket from the front exhaust pipe assembly.

  10. Click here

    REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A017CD8E01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      09224-00010