INTAKE MANIFOLD INSPECTION


  1. INSPECT INTAKE MANIFOLD


    1. A017BMME01

      Cylinder head side:


      1. Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.

        Maximum warpage
        0.1 mm (0.003 in.)
        If the warpage is greater than the maximum, replace the intake manifold.

    2. Surge tank side:


      1. Using a precision straightedge and feeler gauge, measure the surface contacting the surge tank for warpage.

        Maximum warpage
        0.1 mm (0.003 in.)
        If the warpage is greater than the maximum, replace the intake manifold.