AIR CLEANER AND HOSE INSTALLATION


  1. INSTALL INTAKE AIR RESONATOR


    1. A017BM2

      Tighten the bolt to install the intake air resonator.

  2. INSTALL NO. 1 AIR CLEANER HOSE


    1. A017G5GE01

      Align the tab on the air cleaner cap with the groove on the air cleaner hose and tighten the bolt.

      Tech Tips


      • A = 30°

      • B = 11 to 14 mm (0.433 in. to 0.551 in.)

  3. INSTALL NO. 3 INTAKE AIR CONTROL VALVE ASSEMBLY


    1. A017E9E

      Engage the 2 claws and install the No. 3 intake air control valve assembly.

  4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A017BI0

      Install the air cleaner case with the 3 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the hose and connector.

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A017DHBE01

      Install the air cleaner filter element, align the groove on the air cleaner hose with the throttle body alignment tab and tighten the clamp as shown in the illustration.

      Tech Tips


      • A = 30°

      • B = 11 to 14 mm (0.433 in. to 0.551 in.)

    2. Install the air cleaner cap with the 2 bolts and clips.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
    3. A017BB9

      Connect the 3 vacuum hoses.

    4. A017EEU

      Connect the mass air flow meter connector.

    5. Connect the No. 2 ventilation hose and fuel vapor feed hose assembly.

  6. INSTALL NO. 1 AIR CLEANER INLET


    1. A017C2QE01

      Install the No. 1 air cleaner inlet with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf, [A] }
      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf, [B] }

    2. Connect the 2 vacuum hoses.

  7. INSTALL NO. 2 AIR CLEANER INLET


    1. A017D82

      Install the No. 2 air cleaner inlet with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the 2 vacuum hoses and harness clamps.

  8. INSTALL BATTERY

    Note

    When reconnected the cable, some systems need to be initialized. Click here.


    1. A017FMCE02

      Install the battery tray and battery.

    2. Install the battery clamp with the bolt and nut.

      Torque:
      Bolt
      5.4 N*m  { 55 kgf*cm, 47 in.*lbf }
      Nut A
      5.4 N*m  { 55 kgf*cm, 47 in.*lbf }

    3. Connect the positive battery terminal, and tighten the nut.

      Torque:
      Nut B
      6.4 N*m  { 64 kgf*cm, 57 in.*lbf }

    4. Connect the negative battery terminal, and tighten the nut.

      Torque:
      Nut C
      6.4 N*m  { 64 kgf*cm, 57 in.*lbf }

  9. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A017CN1

      Install the cool air intake duct seal with the 11 clips.