PURGE VALVE REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A017EFM

      Hold the front of the V-bank cover sub-assembly and raise it to disengage the 2 clips on the front of the V-bank cover sub-assembly. Continue rising the V-bank cover sub-assembly to disengage the clip on the rear of the V-bank cover sub-assembly and remove the V-bank cover sub-assembly.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the V-bank cover sub-assembly to break.

  2. REMOVE PURGE VSV


    1. A017F01

      Disconnect the 2 vacuum hoses and purge VSV connector.

    2. Disconnect the wire harness clamp.

    3. A017EOJ

      Remove the bolt and purge VSV.