FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A017EW9E01

      Remove the fuel sender gauge assembly.

    2. Check the operation of the float moving smoothly between F and E.

    3. Measure the resistance between terminals 2 (FE) and 3 (FS) of the connector according to the value(s) in the table below.

      OK
      Float Level Resistance (Ω)
      F 3.0 to 5.0
      E 109.0 to 111.0

      Tech Tips

      If the value is not as specified, replace the fuel sender gauge assembly.