FUEL PUMP RESISTOR INSTALLATION


  1. INSTALL FUEL PUMP RESISTOR


    1. A017CDS

      Install the fuel pump resistor cover.

    2. A017DDN

      Install the fuel pump resistor with the nut.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    3. Connect the connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.