Click here

FUEL PUMP REASSEMBLY

Click here
Click here
  1. Click here

    INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. A017FO5E02

      Install the No. 1 fuel suction support to the fuel filter.

  2. Click here

    INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. A017DEUE09

      Apply a light coat of gasoline or spindle oil to 2 new O-rings, then install them onto the fuel pressure regulator.

    2. A017BDSE02

      Install the fuel pressure regulator to the fuel filter.

  3. Click here

    INSTALL FUEL PUMP


    1. A017DOLE02

      Apply gasoline to a new O-ring and install it to the fuel filter.

    2. A017B11E01

      Engage the 5 claws on the fuel filter and install the fuel pump with the pump filter.

  4. Click here

    CONNECT FUEL PUMP HARNESS


    1. A017F3BE01

      Connect the fuel pump harness connector.

      Note:

      Do not separate the tube indicated in the illustration (Click here).

  5. Click here

    INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    1. A017CBCE01

      Install the fuel pump filter tube while aligning it to the installation position of the No. 1 fuel sub-tank.

    2. Connect the jet pump nozzle.

    3. A017C1OE02

      Make sure that the fuel tube passes under the protrusion of the fuel filter, and engage the claw of the No. 1 fuel suction support.

    4. Install the spring to the fuel suction plate shaft and install it to the No. 1 fuel sub-tank.

    5. A017CTHE01

      Install a new E-ring.

  6. Click here

    INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A017BC8E02

      Slide the fuel sender gauge to fit the claw.

    2. Connect the fuel sender gauge connector.