CANISTER INSTALLATION


  1. INSTALL CHARCOAL CANISTER ASSEMBLY (for LHD)


    1. A017EV1

      Install the charcoal canister assembly with the 2 bolts.

      Torque:
      26.5 N*m  { 270 kgf*cm, 20 ft.*lbf }
    2. A017CNW

      Connect the 2 hoses.

  2. INSTALL CHARCOAL CANISTER ASSEMBLY (for RHD)


    1. A017D3A

      Install the charcoal canister assembly.

    2. A017D62

      Connect the 2 hoses.

  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A017BI0

      Install the air cleaner case with the 3 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the hose and connector.

  4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A017DHBE01

      Install the air cleaner filter element, align the groove on the air cleaner hose with the throttle body alignment tab and tighten the clamp as shown in the illustration.

      Tech Tips


      • A = 30°

      • B = 11 to 14 mm (0.433 in. to 0.551 in.)

    2. Install the air cleaner cap with the 2 bolts and clips.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
    3. A017BB9

      Connect the 3 vacuum hoses.

    4. A017EEU

      Connect the mass air flow meter connector.

    5. Connect the No. 2 ventilation hose and fuel vapor feed hose assembly.

  5. INSTALL NO. 2 AIR CLEANER INLET


    1. A017D82

      Install the No. 2 air cleaner inlet with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the 2 vacuum hoses and harness clamps.

  6. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A017CN1

      Install the cool air intake duct seal with the 11 clips.