REAR CRANKSHAFT OIL SEAL INSTALLATION


  1. INSTALL ENGINE REAR OIL SEAL


    1. A017CLPE01

      Apply MP grease to a new oil seal lip.

    2. Using SST and a hammer, tap in the oil seal.

      SST
      09223-15030
      09950-70010   ( 09951-07150 )
      Oil seal tap in depth
      -0.5 to 0.5 mm (-0.020 to 0.020 in.)

  2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A017ELCE01

      Using SST, hold the crankshaft.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A017F9BE04

      Apply adhesive to 2 or 3 threads of the mounting bolt end.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

      1. A017FUPE01

        Install the front spacer, drive plate and rear spacer on the crankshaft.

      2. Install and tighten the 8 mounting bolts uniformly in several steps.

        Torque:
        83 N*m  { 850 kgf*cm, 61 ft.*lbf }

  3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 2WD)

    Tech Tips

    Click here.

  4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 4WD)

    Tech Tips

    Click here.