REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2WD)

    Tech Tips

    Click here.

  2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 4WD)

    Tech Tips

    Click here.

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A017ELCE01

      Using SST, hold the crankshaft.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A017FUP

      Remove the 8 bolts, front spacer, drive plate and rear spacer.

  4. REMOVE ENGINE REAR OIL SEAL


    1. A017CB4E02

      Using a knife, cut off the oil seal lip.

    2. Using a screwdriver, pry out the oil seal.

      Note

      Be careful not to damage the crankshaft. Tape the screwdriver tip before use.