CYLINDER BLOCK REPLACEMENT


  1. REPLACE STRAIGHT PIN


    1. Using a plastic hammer, tap in new straight pins to the cylinder block.

      A017DR4E05
      Standard protrusion
      Item Protrusion
      Pin A 23 mm (0.906 in.)
      Pin B 6 mm (0.236 in.)
      Pin C 11 mm (0.433 in.)
      Pin D 9 mm (0.354 in.)

  2. REPLACE STUD BOLT


    1. Using E8 and E10 "TORX" sockets, install the stud bolts.

      A017FZXE01
      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf, for bolt A }
      17 N*m  { 173 kgf*cm, 13 ft.*lbf, for bolt B }