DRIVE BELT INSPECTION


  1. INSPECT V-RIBBED BELT


    1. A017G4L

      Visually check the V-ribbed belt for excessive wear, frayed cords, etc.

      If any defect has been found, replace the V-ribbed belt.

      Tech Tips

      If the V-ribbed belt has chunks missing from its ribs, it should be replaced.

      Tech Tips


      • A "new V-ribbed belt" is a V-ribbed belt which has been used for less than 5 minutes with the engine running.

      • A "used V-ribbed belt" is a V-ribbed belt which has been used for 5 minutes or more with the engine running.

  2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY


    1. Check that nothing gets caught in the V-ribbed belt tensioner assembly by turning it clockwise and counterclockwise.

      If a malfunction exists, replace the V-ribbed belt tensioner assembly.