INTEGRATION RELAY REMOVAL


  1. SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for LHD)


    1. A017DMO

      Disconnect the level warning switch connector.

    2. Remove the bolt, and separate the brake master cylinder reservoir assembly.

  2. REMOVE RESERVOIR BRACKET (for LHD)


    1. A017BM4

      Remove the 2 bolts and reservoir bracket.

  3. REMOVE NO. 1 RELAY BLOCK COVER


    1. A017FMN

      Remove the No. 1 relay block cover.

  4. REMOVE ENGINE ROOM JUNCTION BLOCK ASSEMBLY


    1. A017DIT

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the engine room junction block assembly.

    2. A017C13

      Disconnect the 4 connectors.