Click here

HEATED OXYGEN SENSOR INSPECTION

Click here
Click here
  1. Click here

    INSPECT HEATED OXYGEN SENSOR


    1. A017CL3E08

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Table 1. Bank 1
      Tester Connection Condition Specified Condition
      2 (HT1B) - 1 (+B) 20°C (68°F) 11 to 16 Ω
      2 (HT1B) - 3 (E2) Always 10 kΩ or higher
      Table 2. Bank 2
      Tester Connection Condition Specified Condition
      1 (HT2B) - 2 (+B) 20°C (68°F) 11 to 16 Ω
      1 (HT2B) - 4 (E2) Always 10 kΩ or higher

      If the resistance is not as specified, replace the heated oxygen sensor.