CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY INSPECTION


  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. Resistance inspection:


      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 6.9 to 7.9 Ω

        If the result is not as specified, replace the camshaft timing oil control valve assembly.

    2. A017D7GE01

      Movement inspection:


      1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check the movement of the valve.

        Note

        Confirm that the valve moves freely and does not stick in any position.

        If the result is not as specified, replace the camshaft timing oil control valve assembly.

        Tech Tips

        Accumulation of foreign objects causes subtle pressure leaks. The subtle pressure leaks will cause the cam to advance, and this will cause a DTC to be set.