Click here

ECM REMOVAL

Click here
Click here
  1. Click here

    REMOVE FRONT DOOR SCUFF PLATE RH (for LHD)

    Tip:

    Use the same procedure for the RH side and the LH side.

  2. Click here

    REMOVE FRONT DOOR SCUFF PLATE LH (for RHD)


    1. A017B6P

      Disengage the 8 claws and guide, and remove the front door scuff plate LH.

  3. Click here

    REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)

    Tip:

    Use the same procedure for the RH side and the LH side.

  4. Click here

    REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for RHD)


    1. A017G63

      Remove the clip.

    2. Disengage the clip and claw, and remove the cowl side trim sub-assembly LH.

  5. Click here

    REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A017B7A

      Disengage the 3 claws.

    2. Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.

  6. Click here

    REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A017F5K

      Remove the 2 bolts <B> and 3 screws <E>.

    2. Disengage the 4 claws and 3 clips.

    3. Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.

  7. Click here

    REMOVE ECM


    1. A017BCBE01

      Disconnect the 6 ECM connectors.

    2. Separate the 2 wire harness clamps (for LHD).

    3. Remove the wire harness clamp (for RHD).

    4. Remove the 2 nuts, bolt and ECM with the ECM bracket.

    5. A017B1JE01

      Remove the 4 screws and 2 ECM brackets from the ECM.