ECM REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and the LH side Click here.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side Click here.

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A017B7A

      Disengage the 3 claws.

    2. Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.

  4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A017F5K

      Remove the 2 bolts <B> and 3 screws <F>.

    2. Disengage the 4 claws and 3 clips.

    3. Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.

  5. REMOVE ECM


    1. Separate the harness connector (LHD).

    2. Disconnect the 5 ECM connectors.

    3. A017EOSE01

      Remove the wire harness clamp.

    4. Remove the 2 nuts, bolt and ECM.

  6. REMOVE NO. 1 ECM BRACKET


    1. A017DMSE01

      Remove the 2 screws and No. 1 ECM bracket.

  7. REMOVE NO. 2 ECM BRACKET


    1. A017DLVE01

      Remove the 2 screws and No. 2 ECM bracket.