Click here

ECM REMOVAL

Click here
Click here
  1. Click here

    REMOVE FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure for the RH side and the LH side (Click here).

  2. Click here

    REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and the LH side (Click here).

  3. Click here

    REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A017B7A

      Disengage the 3 claws.

    2. Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.

  4. Click here

    REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A017F5K

      Remove the 2 bolts <B> and 3 screws <F>.

    2. Disengage the 4 claws and 3 clips.

    3. Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.

  5. Click here

    REMOVE ECM


    1. Separate the harness connector (LHD).

    2. Disconnect the 5 ECM connectors.

    3. A017EOSE01

      Remove the wire harness clamp.

    4. Remove the 2 nuts, bolt and ECM.

  6. Click here

    REMOVE NO. 1 ECM BRACKET


    1. A017DMSE01

      Remove the 2 screws and No. 1 ECM bracket.

  7. Click here

    REMOVE NO. 2 ECM BRACKET


    1. A017DLVE01

      Remove the 2 screws and No. 2 ECM bracket.